Axxess ASWC Instrukcja Użytkownika Strona 7

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 64
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 6
Brown/White goes to Brown/Black.
5) For
all
other radios,
plug
in
the male 3.5mm connector
of
the ASWC into
the back
of
the aftermarket radio, designated for an external SWC
control interface. Please
refer to the aftermarket radios manual
if
you
are
in
doubt where the 3.5mm connector
of
the ASWC goes.
Once all
connections have been made, plug
in
the aftermarket radio if not
done already.
Programming the
ASWC
The ASWC can be programmed in two ways; it can do it by itself
in
Auto
Detect Mode or it can be manually
programmed. We
will
start with the Auto
Detect Mode first:
Auto Detect Mode:
The ASWC has the ability to auto detect certain vehicles and to know what
aftermarket radio it is connected to. The
vehicle info sheet from the Axxess
website (www.axxessinterface.com)
will
show if your
vehicle would
be auto
detected and what action,
if
any, is required by you for this process to take
place.
For the Auto Detect feature to work there are 3 possible actions, however
only one action
will
be required by you depending on your
vehicle:
1) Turn the ignition on and no other action is required.
2)
Turn the ignition on, press and hold down the Volume Up button on the
steering wheel.
Or
3) Turn the ignition on, press and release the Volume Up button repeatedly
on the steering wheel.
Przeglądanie stron 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 63 64

Komentarze do niniejszej Instrukcji

Brak uwag